SMP100 User Guide
1
Part 1 SMP100 Chassis Overview
1.1 Front Panel
SMP100 is a 1-U multi-purpose content delivery platform. Equipped with three hot-swappable
modules, SMP100 supports almost any video delivery application with flexible combination of
receiving, de-scrambling, transcoding, re-multiplexing/grooming, scrambling, modulating and IP/ASI
turn around.
1. Indicators ( For Power, ASI, TS/IP and decoder status)
Red or Flashing Red : Error
Green: Normal
Flashing Green: Initialing or loading a board
2. LCD Screen
3. Up, Down, Left, and Right buttons
4. Menu, OK, and Esc buttons
1.2 Rear Panel
Note the position of each slot on rear panel. Fasten the modules in the chassis by screws to avoid
loose connection between the modules and mainboard.
To Next Page
Loading...
General