Need help?Do you have a question about the Sencore SMP100 and is the answer not in the manual?
Step-by-step guide for mounting the SMP100 unit into a standard 19-inch rack.
Introduction to the Web Graphical User Interface for device management.
Instructions on establishing network connectivity to the SMP100 management port.
Steps to access and log into the SMP100's web interface.
Interface for distributing input and output services across modules.
Fundamental configuration and operational tasks for the SMP100.
Setting up network parameters like IP address, subnet mask, and gateway.
Enabling and configuring various input interfaces such as ASI and TSIP.
Setting up output transport streams and managing program services.
More complex configuration and management tasks for the SMP100.
Modifying detailed parameters of output transport streams.
Adjusting service details, like SI, for DVB outputs.
Configuration and operation of the Common Interface descrambling module.
Configuration and operation of the CI-BISS descrambling module.
Setup and configuration for the scrambler module, including ECMG and EMMG connections.
To Next Page
General