Sencore SMP100 - 3.2.4 Configuring Output

SMP100 User Guide
10
3.2.3 Clear and Bypass the Input
Clear the input TS
Use the Clear TS option right under Batch Scan to remove an input TS.
Bypass the input TS
Use the Bypass TS option to pass a whole TS to the output port or channel. A bypassed TS will not
be multiplexed. See the following image, a blue *[Bypass TS] follows the TS1 as a mark.
To cancel Bypass TS, right-click the TS and select Cancel Bypass TS.