VP400 Series Video Pro Form7343A Operation Manual
5
Specifications
Video Formats
Storage: 100 total
VESA/Mac 38 standard formats from
640x350 to 1920x1024
NTSC NTSC
PAL PAL, PAL-Y
SDTV 420i29, 480i30, 480i59, 480i60
480p59, 480p60
HDTV 720p59, 720p60, 960p59,
1080i25, 1080i29, 1080i30, 1080p50,
1080p59, 1080p60, 1080s23,
1365x1024
Video Outputs (VP400, 401, 402, 403)
DTV: SDTV: YPbPr, RGB, DVI
HDTV: YPbPr, RGB, DVI
NTSC: Composite, S-Video, RGB
PAL: Composite, S-Video, RGB
Computer: VGA/Mac: RGB, DVI
Horizontal Timing
Frequency: 1.5 kHz – 250 kHz
Total pixels: 32 to 4095
Active range: 16 to 4094 pixels
Vertical Timing
Frequency: 1 Hz – 1 kHz
Active lines: 1 – 4095
Scan Types: Progressive, Interlace
Sync Types
Separate Digital Horizontal and Vertical
Digital and Analog Composite
Tri-level HDTV
Bi-level
NTSC RF channel Output (402, 403)
Channels: CH2, CH3, CH4, CH6
Carrier Level: 10 dBmV +/- 3 dBmV
Carrier Accuracy: +/- 50 kHz
ATSC RF Channel Output (VP402, 403)
Channels: CHs 2-4, 7-10, 30-32
MER: >30 dB
Audio output
Channels: Two channels
Frequency: 1 kHz (left), 2 kHz (right)
Connector: 3.5mm phone jack stereo
SDI (‘SH’ only): SMPTE 292M, 10 bit 1.485 Gb/s
525i (720x486@59.94) ITU-R/BT.601-4
625i (720x576@50i) ITU-R/BT.601-4
HDSDI (‘SH’ only): SMPTE 259M, 10 bit 270 Mb/s
Formats: 720p @60, 59.94, 50 Hz
1080i, 1080p @30, 29.97, 25, 24, 23.98 Hz
Patterns: SMPTE Bar, Staircase, H_Stair, Pluge,
Needle, HiLoTrk, Overscan, Sharpness
Window1, Window2, Raster, DecodAdj
DecodChk, ColorBar, Croshhatch,
Converge, Linearity, Anamorphic, Ramp
Regulate, Checker, Multiburst, Focus
Still Picture Images VP403C: Hiking Couple,
Girl
Video Clips 403C: Hot Air Balloons (720p),
Hawaii Scenes (1080i)
Gray levels/Colors Displayed: 16/16
Test (Sequence)
Storage: 100 steps
Edit method: PC
Parameters: Load Format & Pattern
Auto time: 0.1 sec. to 24 hours
Name: 8 characters
User Interface
Display: 20x4 char. LCD/backlight
Pushbuttons: 9 function, 8 menu select
Computer Port
Type: RS-232C
Baud Rate: 9600
Handshake: none, Xon/Xoff
Connector: 9 pin D-Sub receptacle
Download: Copy Formats and
Firmware updates via PC
DDC (Display Data Channel)
Read EDID data & display supported formats
Version supported: DDC-2B (read only)
Power
Battery: (6) AA Batteries NiMh
Use time: 8 hours with NiMh
AC: 12V Charger/Adapter PS
Re-charge 400/401: ~8 hr, 402/403:~4 hr
Frequency: 48 to 66 Hz
Voltage: 86 – 250 VAC (auto)
Weight & Size
VP400, VP401: 1.5 lbs.
VP402, VP403: 2.0 lbs
VP400, VP401: 6 x 8.25 x 2 in.
VP402, VP403: 6 x 8.25x 3.5 in
To Next Page
Loading...
Need help?
General
