Sennheiser AMBEO - Using the Dolby DRC; Using the Dolby Dialog Normalizer; Using the Dolby Virtualizer

Using the AMBEO Soundbar
42 | AMBEO Soundbar
Parameters:
•4-band EQ split into
–Foundation
– Low-Mid
–Clarity
– Brillance
• Adjustment range + 10 dB to -10 dB
The app allows you to make additional acoustical settings in addition
t
o the equalizer settings.
If the “Dolby Virtualizer” is activated, you cannot use the equal-
izer (> 42).
Using the Dolby DRC
You can use the “Dolby DRC” (“Dynamic Range Compression”) to
play back Dolby audio content. This function compresses the
dynamics of the audio signal, thus changing differences from soft to
loud passages.
The “Dolby DRC” function can be activated/deactivated in the codec
se
ttings of the Smart Control app.
• “Off”: no change, full dynamics
•“Auto”: automatic reduction of dy
namics; changes in volume can
be perceived during playback
• “Normal”: slight compression of dynamics
• “Heavy”: heavy compression of dynamics
Using the Dolby Dialog Normalizer
You can use the “Dolby Dialog Normalizer” to play back Dolby audio
content. This function makes dialogs easier to understand by reduc-
ing loud music/background noise and amplifying softer dialog audio.
The “Dolby Dialog Normalizer” can be activated/deactivated in the
codec s
ettings of the Smart Control app.
Using the Dolby Virtualizer
You can use the “Dolby Virtualizer” to play back Dolby audio content.
This function plays back Dolby audio content unchanged.
The “Dolby Virtualizer” can be activated/deactivated in the codec
se
ttings of the Smart Control app.