Using the AMBEO Soundbar
AMBEO Soundbar | 43
If the “Dolby Virtualizer” is activated, you can no longer use the fol-
lowing functions/settings:
• Sound profiles
•AMBEO modes
• Equalizer
• Room calibration data (the measured
room data is not used for
Dolby audio content)
Adjusting the brightness of the display
and the AMBEO display
The brightness of the display and the AMBEO display can be
adjusted via the Smart Control app.
There are three brightness levels:
• low brightness
• high brightness
• automatic brightness (activ
ated upon delivery)
If “automatic brightness” is selected, the display and the AMBEO dis-
play automatically adjust to the ambient brightness.
The brightness of the display and the AMBEO display can also be
adj
usted independently of each other via the app.
Sound feedback
The beep tones can be switched off via the app.
Transporting the AMBEO Soundbar
ATTENTION
Material damage due to improper transport!
Incorrect packing of the Soundbar
may cause damage to the Sound-
bar during transport.
▷ Only transport the Soundbar in the original packaging with its
protective foam parts.
Use the original packaging to transport the Soundbar.
To Next Page
Loading...
