Sennheiser AMBEO - Putting the AMBEO Soundbar into operation

Putting the AMBEO Soundbar into operation
AMBEO Soundbar | 27
Putting the AMBEO Soundbar into
operation
Preparing the SB01-RC remote control
To remove the transport protection of the battery:
▷ Use a suitable object (e.g. a coin) to open the battery compart-
ment cover (located on the bottom side of the remote control) by
tu
rning one turn counter-clockwise.
▷ Remove the plastic strip.
▷ Close the battery compartment cover by turning one turn clock-
wise.
Connecting/disconnecting the Soundbar
to/from the power supply system
CAUTION
Danger of damage to the product!
If you connect to an unsuitable power supply, the product can be
damag
ed.
▷ Use a suitable power cable to connect the product to the power
supply system (100 - 240 V~, 50/60 Hz).
Connecting the Soundbar to the power supply system
▷ Connect the plug of the power cable to the POWER socket on the
Soundbar.
▷ Connect the power plug of the power cable to a suitable wall
socket.