EasyManuals Logo

Sentry CA756 User Manual

Sentry CA756
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
23
22
• When pressed following the key in the BASE-N
mode, the subsequently entered value is specified as a
decimal value.
Square/Fraction key
• Press after a numeric value is entered to obtain the
square of that value.
• Press following key prior to inputting number in
order to obtain fraction part of that number.
• Press followed by in the BASE-N mode to specify the
hexadecimal calculation mode.
• When pressed following the key in the BASE-N
mode, the subsequently entered value is specified as a
hexadecimal value.
Common logarithm/Antilogarithm key
• Press prior to entering a value to obtain the common
logarithm of that value.
• When pressed following the key, the subsequently
entered value becomes an exponent of 10.
• Press followed by in the BASE-N mode to specity the
binary calculation mode.
• When pressed following the key in the BASE-N
mode,the subsequently entered value is specified as a
binary value.
Natural logarithm/Exponential key
• Press prior to entering a value to obtain the natural
logarithm of that value.
• When pressed following the key, the subsequently
entered value becomes an exponent of e.
• Press followed by in the BASE-N mode to specify the
octal calculation mode.
• When pressed following the key in the BASE-N
mode,the subsequently entered value is specified as an
octal value.
Reciprocal/Factorial key
• Press after entering a value to obtain the reciprocal of that
value.
• When pressed following the key, the factorial of a
previously entered value can be obtained.
• Press in the BASE-N mode to enter A (10
10
) of a
hexadecimal value.
Degree/minute/second key (decimal
sexagesimal key)
• Press to enter sexagesimal value (degree/minute/second
or hour/minute/second).
Ex. 78°45'12" 78 45 12
• When pressed following the key, a decimal based
value can be displayed in degrees/minutes/seconds
(hours/ minutes/seconds).
• Press in the BASE-N mode to enter B (11
10
) of a
hexadecimal value.
Hyperbolic key
• Pressing , and then , ,or prior to
entering a value produces the respective hyperbolic
function (sinh, cosh, tanh) for the value.
• Pressing , then , and then, , , or
prior to entering a value produces the respective
inverse hyperbolic function (sinh
-1
, cosh
-1
, tanh
-1
) for the value.
S6600G-ENG-A 8/30/04, 11:05 AMPage 22-23 Adobe PageMaker 6.5C/PPC

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sentry CA756 and is the answer not in the manual?

Sentry CA756 Specifications

General IconGeneral
BrandSentry
ModelCA756
CategoryCalculator
LanguageEnglish

Related product manuals