SOFTWARE INSTALLATION
SOLARIS INSTALLATION OR RE-INSTALLATION
0311385 Issue : April 1999
3-5
• In the "Mount Remote File Systems ?" window, click "Continue".
• The selected configuration is displayed in the "Profile" window :
Installation option
Initial
System Type
Standalone
Software
End User System Support
- Including
Point-To-Point protocol
Terminal Information
File System and Disk Layout
/ c0t3d0s0 50 MB (minimum)
swap c0t3d0s1 96 MB (minimum)
overlap c0t3d0s2 xxx MB
/usr c0t3d0s6 yyy MB
/export/home c0t3d0s7 zzz MB
- Click "Begin Install"
• If a "WARNING" window pops up, click "Continue".
- When OK to reboot after installing Solaris is prompted,
click "Reboot".
- The system then installs Solaris. This may take a while (up to some 10
hours), depending on the type of station and drive and on the Solaris
CDROM Hardware version (because it may include a number of the
patches which are automatically loaded).
- If any error is encountered it appears in the Console window.
At the prompt Root password : (press ↵)
Root password : (press ↵)
hci388 console login :
Type root (press ↵)
#eject cd (press ↵)
Press<Control D>. This completes SOLARIS installation.
hci388 console login :
To Next Page
Loading...