1.
Raman spectroscopy is a spectroscopy technique which can be used for rapid identifica-
tions of chemicals. The Raman effect occurs when a light (f.eg. from a laser) interacts with
the sample molecules. Light scattered from the molecules gives rise to a spectrum that typ-
ically consists of a series sharp lines and can be considered to constitutes molecules finger-
print of the analyzed substance.
The Arx instrument is a hand-held Raman spectrometer which can be used without for-
mal training in spectroscopy to obtain chemical identity of substances as well as verify the
quality of known substances in order to be able to make immediate action decisions in the
field. The Arx is a standalone instrument that operates without need for other components.
However, generating measurement reports, user management and management of user
defined libraries is performed using the PC software Chemdash. The use of the Chemdash
software requires basic PC knowledge. Laser training is needed for all users since the in-
strument includes class 3B invisible laser.
This manual describes the basic functions of the instrument. Functions may be different
depending on the hardware and/ or software version in the device. The manual covers Arx
devices with embedded software functionality version 5.5.0 or later.
The software version is shown in the “About” window. The serial number of the instrument
is printed on the back of the instrument (S/N) and is also shown in the “About” window for
software.
Please NOTE that you can access ChemDash 2.0 only if your instrument is running
software version 5.5.0 or later. If your instrument is running an older version, please
upgrade the firmware first by following the instructions in the Firmware Upgrade
Guide on serstech.com
This is intended for Laser Safety Officers, administrators and users of the SERSTECH
handheld Raman spectrometer instrument. Please read through this section carefully before
using the SERSTECH product. Keep the document for further reference.
Every care has been taken in the preparation of this document. Please inform your local
reseller or SERSTECH AB of any inaccuracies or omissions. SERSTECH AB is not respon-
sible for any technical or typographical errors and reserves the right to make changes to the
product and manuals without prior notice. SERSTECH AB makes no warranty of any kind
regarding the material contained within this document, including, but not limited to, the im-
plied warranties of merchantability and fitness for a particular purpose. SERSTECH AB shall
not be liable nor responsible for incidental or consequential damages in connection with the
furnishing, performance or use of this material. This product is only to be used for its intended
purpose.