EasyManua.ls Logo

Serstech ARX - Support; Contact Information; Invisible Laser Safety

Serstech ARX
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Internet Explorer, Linux, Microsoft, Mozilla, UNIX, Windows and WWW are registered trade-
marks of the respective holders. Java and all Java-based trademarks and logos are trade-
marks or registered trademarks of Oracle and/ or its affiliates. UPnP is a certification mark
of the UPnP Implementers Corporation. SD, SDHC, SDXC, miniSD, microSD, miniSDHC,
microSDHC and microSDXC are trademarks or registered trademarks of SD-3C, LLC in the
United States, other countries or both.
1.7
Support
In case the User should requires technical assistance, should contact its SERSTECH
reseller. If the User questions cannot be answered immediately, the reseller will forward all
queries through the appropriate channels to ensure a rapid response.
1.8
Contact Information
The contact information of the company is as following:
SERSTECH AB
Åldermansgatan 13
SE-227 64 Lund, SWEDEN
e-mail: info@serstech.com
1.9
Invisible laser Safety Considerations
This operation manual includes information and warnings which must be observed by
the user. It contains information NOTES, as well as information of importance to safety of
personnel and property. The important symbols are:
This is a Class 3B laser product and complies with “Classified
according to standard EN 60825-1:2014”.
Class 3B requirements:
A class 3B device shall have a warning signal, audible or visible
when the invisible laser is active. A red LED in a yellow warning
label placed adjacent to the display solves this requirement. Ac-
cording to the standard, there shall be a yellow label with a black
border, the recommended wording is:
WARNING INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
The backside label on the Arx instrument solves this require-
ment. Also, the frontside label has the word WARNING accord-
ing to standard requirements. Another requirement is that the
laser aperture is labelled, there is thus a yellow pictogram label
besides the nozzle. The only source for dangerous laser expo-
sure is from the nozzle; the protective casing is designed not to
leak laser emission in any other place. With intended use, there
is no raised danger for laser exposure when accessing the dis-
play controls. A remote interlock connector is not required for