Verify analysis result
There are two possible outcomes from the Verify scan, either Pass (OK) if the sample is like
the reference spectrum or Fail (not OK) if the sample is different.
Pass screen is displayed if the analyzed
substance spectrum has sufficient corre-
lation with the reference spectrum, f.eg.
equal to or over the Verify Threshold
limit.
The sequential number in the upper right
corner, here 23, is the number of meas-
urements done with the instrument.
Fail screen is displayed if the analyzed
substance spectrum has a correlation
with the reference spectrum which is be-
low the Verify Threshold limit.
The sequential number in the upper right
corner, here 22, is the number of meas-
urements done with the instrument.
To Next Page
Loading...