Server Technology switched pro2 - Page 138

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 138
Command
Description
show syslog
Shows Syslog configuration values.
show system
Shows system uptime, firmware version, firmware build information, boot version, number of
active users, and location string.
show tacacs
Shows TACACS+ configuration values.
show trend
Shows power trending configurations.
show units
Shows PRO2 configuration values.
show ups
Shows UPS device configuration values.
show waps
Displays the available wireless access points (for the WLAN solution on specific Wi-Fi capable
PRO2 units).
show wlan
Displays the wireless network configurations (for the WLAN solution on specific Wi-Fi capable
PRO2 units).
shutdown
Turns off a specified outlet or outlet group after performing a user-specified shutdown
operation.
status
Displays the latest status and control state for a specified outlet or outlet group.
sysstat
Displays the count of all system objects (by type), the latest status of the objects, and the
count of objects currently in an event condition.
upsstat
Displays the latest status and metrics for all UPS devices in the system.
ustat
Displays the latest status and metrics for all PRO2 units in the system.
version
Displays the current firmware version.