EasyManua.ls Logo

Servonaut LA10 - LA10 Lighting Module Overview; Whats Included; Module Features; Scope of Functions

Default Icon
44 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
LA10 Lighting Module
The lighting module LA10 for vehicle
models is first of all meant to comple-
ment Servonaut speed controllers, but it
can be used for other speed controllers
as well as long as they are equipped
with outputs for break and reversing
light.
The LA10 has short-circuit-protected
universal switching outputs which are
suitable for most available light-sets,
LEDs with serial resistor or for some
smaller light bulbs.
What´s in the box
· Lighting module LA10
· 3 patch cables
Features
· Controllable with two or three chan-
nels or one Multichannel
· Compatible with Robbe Multiswitch,
Graupner Nautic Expert, Servonaut
MultiBus
· 10 switching outputs
· Wide range of adjustable features
with Servonaut Card or Servonaut
HS12
·
ready for wireless IR transmission to
Servonaut AMO / AM10 on trailers
·
2 Servo inputs that are transmitted
directly by IR
·
2 diagnostic LEDs
·
New from version 1.3: daytime run-
ning light option on output extra 1
Scope of Functions
·
Indicator and hazard lights
·
Parking light and rear light
·
Low Beam, optional with xenon effect
·
Flasher and High Beam
·
Cornering light and front fog light
·
Rear fog light
·
Output extra 1, choose between uni-
versal output, Parking / Flash light
combination or daytime running light
·
Output extra 2, choose between uni-
versal output or separate front fog
lights
·
Adjustable light bulb effect
·
Adjustable brightness
·
Selectable hazard light while
reversing
·
Indicator reset is selectable as man-
ual, timer or steering