38
Overview of Settings
Combi effect (Off, 20% to 80%)
The combi effect combines parking light
and low beam to common LEDs or light
bulbs in the front. It simulates a twin
filament bulb (Bilux). The brightness of
the front parking light that shares the
same output like the low beam can be
adjusted here.
Hint: Low beam and brake lights always
use full brightness at the LA10. This
adjustment has no effect to the rear
lights.
On many light sets parking light
and low beam are already com-
bined and sharing one LED. In
this case parking light brightness is not
adjustable properly.
Light bulb effect (Off, 20% to 80%)
Other than the light bulbs, the LEDs
switch on and off immediately. With this
feature you can simulate light bulbs in a
model with LEDs. The adjustment in
percent determins the strength and du-
ration of the effect.
Servo 3 and Servo 4 are
outputs on AMO / AM10* on the
trailer
* DisplayCARD DICA and AM10 are still under
development at the time of printing.
To Next Page
Loading...
Need help?
General