Servonaut LA10 - Factory Settings; Diagnostic LED Codes

41
Factory Settings
Parameter Wert
Combi off
Bulb-Effect 40
Xenon 60
Indicator 100
Parking light 40
US-rear light off
Cornering light (threshold) 60
Parameter Value
Extra1 switch
Extra2 switch
Indicator mode man.
Reversing Indicator off
Servo3 Extra3
Cornering light (steering) norm.
Servo4 norm.
LED-Codes
Diagnostic-LEDs Description
red flashes slowly No signal from receiver
green flashes slowly No MultiBus but proportional signal
green flashes faster Multibus-Signal Robbe-Mode
2x green, 2x green Multibus-Signal Graupner-Mode
3x red, 2x green
Internal error: please contact Servo-
naut for details