Servonaut LA10 User Manual

34
… with multichannel and one additi-
onal channel
In the moment you are connecting LA10
and a soundmodule SM7 to the same
multichannel there are some functions
assigned to the same switch (refer to
graphicinpreviouschapte r→functions
in brackets page 34, 35). E.g. the switch
for the tipper sound and siren also con-
trols the extra outputs 3+4 on an AM10*.
To be able to control these functions
separately an additional channel from
the receiver can be connected to input
F3 of LA10. LA10 recognizes this con-
figuration automatically. Extra functions
1 to 4 are operated as follows:
L/R - Short operation to the left or right
on channel F3 toggles outputs extra 1 or
2 on LA10 module if they are configured
as general purpose outputs.
L/R - Long operation to the left or right
on channel F3 de-/activates functions
extra 3 or 4 on AM10 module or SF6 /
Servo 3 on AMO.
… with Servonaut radio
The Servonaut radio offers a bunch of
different operating variants and the as-
signment of the function keys is adjusta-
ble in a very flexible way.
Further information on the different vari-
ants of operation without multichannel
you can find in the HS12 manual under
lighting systems / Servonaut mini light-
ing system. The LA10 acts on input F1
like an ML4 as descriped in the manual
of HS12.
If you want to control the LA10 with a
multichannel of an HS12 it is best to use
channel 8 on the radio and to set this
channel in the multiswitch menu of
HS12 to Robbe mode.
The assignment of channels X8a to X8h
on HS12 equals the control assignment
of a Robbe-Multi-Switch (see control
assignment Robbe page 34). The as-
signment of switches and control types
of the HS12 channels X8a to X8h can be
adjusted individually.

Servonaut LA10 Specifications

General

Brand	Servonaut
Model	LA10
Category	Lighting Equipment
Language	English