40
Extra 2
Switch: Extra2 is used as a seperate
switching output.
Fog: output Extra 2 is activated by the
front fog light control. The cornering
lights are running independently now
without fog light functionallity.
Indicator switch off mode
Manual: The driver disables the indica-
tor manually.
Steering: The driver switches on the
indicator manually. Returning from the
steering angle to neutral position, the
indicator turns off automatically.
Time: The driver activates the indicator
manually. After approx. 4 seconds the
indicator is switched off automatically.
Indicator reversing (on, off):
On: The hazard lights turn on simulti-
nously with the reversing light.
Off: Hazard lights and reversing light are
working independently.
Servo 3:
Extra 3: The servo 3 on AM10* is acti-
vated by Multiswitch function a/1 or h/8.
Steering: The servo 3 on AM10*
receives the steering signal that needs
to be applied to the LA10. Only available
on AM10*.
Cornering light:
Norm/Rev: In case that steering to the
right activates the left cornering light you
need to change this setting.
Servo 4:
Norm/Rev: Determines the turning
direction of servo output 4 on AMO or
AM10*.
To Next Page
Loading...