44
Version 3 2012-08
GB
NOTE!
A water lter improves the water quality of the water
used by removing contaminants and scale from the
water. SEVERIN recommends the use of a water
lter for high water quality starting with 10 °dH.
8. Fill the water tank with cold drinking water up to the "Max“ marking
and place it on the device (Fig. 3). Here, make sure that the water tank
hooks into the top of the device and lies close against the device.
9. Select with the e-Select
• NO, if you do not want to use a water lter or
• YES, if you want to insert a water lter in the water tank.
 The display shows:
RINSING
Water runs from the coffee-milk dispenser into the drip tray.
As soon as the rinsing procedure is complete, the display shows
the "Beverage selection" view. The device is now ready for opera-
tion.
g. 2: Inserting the water lter g. 3: Insert water container
To Next Page
Loading...
Need help?
General
