SEW-Eurodrive ECDriveS - Operating displays for startup and operation on the PROFINET IO; TCP;IP addressing and subnetworks

3
Assembly and installation notes
Operating displays for startup and operation on the PROFINET IO
Manual – ECDriveS
®
12
3.3 Operating displays for startup and operation on the PROFINET IO
ECC-DFC-24-00
[1] [2] [3] [4]
[6] [5]
24914696587
[1] "Left motor" LED – motor status indicator
[2] RJ45 socket, left
[3] RJ45 socket, right
[4] "Right motor" LED – motor status indicator
[5] Right sensor status LED indicator
[6] Left sensor status LED indicator
The 4 LEDs [1], [4], [5], [6] flash red at the same time when "Flash LED" is clicked in
the engineering tool.
The LEDs "Activity" and "Link" are visible only in the top view of the RJ45 sockets [2],
[3]:
[7]
[8][7]
[8]
A B
24917007499
A Top view, RJ45 socket [2]
B Top view, RJ45 socket [3]
[7] Link LED
[8] Activity LED
LED State Meaning
Link [7] Green Ethernet connection available.
Link [7] Off No Ethernet connection available.
Activity [8] Yellow Data transfer via Ethernet in progress.
3.4 TCP/IP addressing and subnetworks
The address of the TCP/IP protocol is set using the following parameters:
• MAC address
25938274/EN – 01/2019