SG-2000 MANUAL 53
The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
©1995, SGC, Inc. TEL: (206) 746-6310 FAX: (206) 746-6384
receiver is silenced if no signal is present.
Speaker On - Off Press 4 Observe front panel display changes and
speaker is silenced when SPK light is
extinguished on LCD.
Timer On - Off Press 5 Observe "TIMER" indication over clock portion
on LCD.
Time - Date Display Press 6 Displays clock time or date on front panel.
Intercom On - Off Press 7 enter # of remote head desired or 7 ,
0 for all heads
20 dB Attenuator On - Off Press 8 Observe front panel display changes
Power High - Low Press 9 Observe HI PWR or LO PWR flag on LCD.
SHIFT FUNCTIONS
Back light Set Press SHIFT/FUNC , CHAN then Up Arrow or Down Arrow
Display control head ID Press SHIFT/FUNC , 0
View Timer Frequency On Press SHIFT/FUNC , 1
Alarm Time - Frequency Off Press SHIFT/FUNC , 2
Squelch Level Set Press SHIFT/FUNC , 3 then Up Arrow or
Down Arrow
Noise Blanker On - Off Press SHIFT/FUNC , 4
Beep each key stroke Press SHIFT/FUNC , 5
Alternate Time - Date Press SHIFT/FUNC , 6
SWR Forward - Reverse Press SHIFT/FUNC , 9
SCAN FUNCTIONS
To Next Page
Loading...
