Sharp AL-1000

(5) Remove three E-rings and remove the manual paper feed
roller B9.
(6) Remove the pick-up roller.
(7) Cut the binding band and remove the multi paper feed
solenoid.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
D. Pressure plate holder attachment
(1) Attach the pressure plate holder so that the resin section is
not covered with the seal M1-N.
2)
1)
1)
1)
3)
L
O
C
K
T
O
K
2)
1)
1)
2)
3)
Multi paper feed
solnoid
Pressure plate
holder
Seal M1-N
Attachment
reference
Attachment
reference
AL-1000/1010
8-15