Sharp Aquos LC-40LE820M

26
Watching TV
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
Energy conservation settings
Press MENU and the MENU screen displays.
1
Press
c/d
to select “Setup”.
Press
b/c/d
to select “ECO”.
3
Press
a
/
b
to select “Sleep timer”, and then
press ENTER.
4
2
Press
a/b
to select “Change”, and then
press ENTER.
5
Press MENU and the MENU screen displays.
1
Energy save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
ECO picture control
This function automatically detects the image source
and decreases the power consumption while keeping
the brightness of the image unchanged.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press
a
/
b
to select “ECO picture control”.
4
Press
c
/
d
to select “On” or “Off”.
5
Press
a
/
b
to select “Energy save”, and then
press ENTER.
4
Press
a
/
b
to select “Standard” or
“Advanced”, and then press ENTER.
5
Selected item Description
Standard Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
Off The backlight brightness is the same
value of your settings in the selected “AV
mode ”.
Press
b/c/d
to select “ECO”.
• ECO menu displays.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)” or “Auto”.
• This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
Press c/d to select “Setup”.
2
Press
b/c/d
to select “ECO”.
• ECO menu displays.
Press
a
/
b
to select the desired item, and
then press ENTER.
6
3
3
NOTE
• You can also go to “ECO” mode by pressing ECO.
1
2
Sleep timer: Remain 2 hr. 00 min.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.
0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min.
Off
Using Sleep timer on the menu screen
40LE820M_en_vn_id.indd 2640LE820M_en_vn_id.indd 26 2010/06/11 9:50:232010/06/11 9:50:23