Sharp Aquos LC-40LE820M

You can check the current version of the software on the
screen.
57
Appendix
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
a
/
b
to select “Reset”, and then press
ENTER.
4
Press
c
/
d
to select “Yes”, and then press
ENTER.
• “Now, TV will restart automatically. OK?” displays
on the screen.
6
Press MENU and the MENU screen displays.
1
Press
c/d
to select “Setup”.
2
Press
c
/
d
to select “Yes”, and then press
ENTER.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
7
Reset
If you have already set the password, enter it
here.
• “Return to factory pre-settings” displays on the
screen.
5
Information
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
Press
c
/
d
to select “HOME” or “STORE”,
and then press ENTER.
8
10
The TV searches for, sort and stores all the
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress,
press RETURN.
NOTE
• When the TV is in “STORE” mode, repeat steps 1 to 8 to
change to “HOME” mode.
Press b/c/d to select “View setting”.
3
Now initialising...
After factory presetting,
TV will restart automatically
Identifi cation
9
Setting the country.
Press
a
/
b
to select your country or area, and
then press ENTER.
• This setting screen only appears during the initial
auto installation.
40LE820M_en_vn_id.indd 5740LE820M_en_vn_id.indd 57 2010/06/11 9:51:322010/06/11 9:51:32