41
Settings when using external devices
Press INPUT on the remote control unit or on
the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a
/
b
.
2
Press INPUT on the remote control unit or on
the TV.
1
Can use for selecting the input source.
Using INPUT on the remote control unit or on the
TV
INPUT allows you to choose from the available input
sources.
Selecting the input source
You can assign each input source a label as you
prefer.
NOTE
• You cannot change labels if the input source is “TV”.
Press INPUT to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press
a
/
b
to select “Input label”, and then
press ENTER.
6
Labelling input sources
CH listTool
Menu
INPUT
:Exit:Enter
INPUT2
INPUT1
INPUT3
INPUT4
INPUT5
DVD
INPUT7
USB
Home network
Not switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Switchable
Repeat the above until the name is fully spelt
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select“END”.
(Example)
8
Press
a
/
b/c/d
to select characters, and
then press ENTER.
• When you want to change the input label that you
have already assigned to the default name, press
c
/
d
to move to “CLEAR” on the “Input label”
screen, and then press ENTER.
7
Press
b/c/d
to select “Option”.
4
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
5
40LE820M_en_vn_id.indd 4140LE820M_en_vn_id.indd 41 2010/06/11 9:51:042010/06/11 9:51:04
To Next Page
Loading...
