34
Audio adjustment
You can adjust the audio of the selected AV mode.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
1
Watching TV
NOTE
• For resetting all adjustment items to the factory preset values, press
a
/
b
to select “Reset”, press ENTER, press
a
/
b
to select “Yes”,
and then press ENTER.
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
5
Selected item
c
button
dbutton
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Increase audio from the
right speaker
Increase audio from
the left speaker
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
Press
c
/
d
to select “On” or “Off”.
Press
a
/
b
to select “Bass enhancer”.
w Bass enhancer
This function allows you to enjoy bass-enhanced sound.
Press c/d to select “Setup”.
w SRS TruSurround (TS) HD
TM
You can enjoy SRS TruSurround HD
TM
sound, the
same as if you were in a movie theatre.
Using SURROUND on the remote control unit
Selected item Description
On
SRS TruSurround HD
TM
creates a high quality surround
sound experience, when watching DVD movies and
TV programmes broadcast in surround sound.
Off
Outputs the normal sound.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
Press
c
/
d
to select “On” or “Off”.
Press
a
/
b
to select “SRS TS HD”.
Press c/d to select “Setup”.
Press c/d to select “Setup”.
Automatic volume adjustment
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic volume control
(Auto volume) reduces this problem by equalizing
levels.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
Press
a
/
b
to select “High”, “Middle”, “Low”
or “Off”, and then press ENTER.
Press
a
/
b
to select “Auto volume”, and then
press ENTER.
4
5
Clear voice
This function emphasises speech against background
noise for greater intelligibility.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
1
3
Press
c
/
d
to select “On”.
Press
a
/
b
to select “Clear voice”.
4
5
Press c/d to select “Setup”.
Press c/d to select “Setup”.
2
Selected item Description
High Reduces the volume gaps among different
sound sources strongly.
Middle Operation on a level between “High” and
“Low”.
Low Reduces the volume gaps among different
sound sources slightly.
Off Does not reduce the volume gaps among
different sound sources.
2
3
1
2
3
4
5
1
2
3
4
5
Press SURROUND to switch the SRS TruSurround
HD
TM
sound function on and off.
Using “SRS TS HD” on the menu screen
1
2
3
40LE820M_en_vn_id.indd 3440LE820M_en_vn_id.indd 34 2010/06/11 9:50:442010/06/11 9:50:44
To Next Page
Loading...
