Sharp AQUOS LC-40LE924RU

18
Daily operation
Switching on/off
Turning on/off the power
1 Turn on (;) the MAIN POWER switch on the
rear of the TV (Page 5).
2 To turn on the TV, press <a on the TV
or >a on the remote control unit.
3 To turn off the TV, press <a on the TV
or >a on the remote control unit.
4 Turn off (a) the MAIN POWER switch on the
rear of the TV (Page 5).
• WhenturningoffthepowerusingtheMAINPOWER
switchontherearoftheTV,EPGdatawillbelost.
Standby mode
E To standby mode
IftheMAINPOWERswitchontherearoftheTVis
turnon(;),youcanswitchittostandbybypressing
<aontheTVor>aontheremotecontrolunit.
E Switching on from standby
Fromstandby,press<aontheTVor>aon
theremotecontrolunit.
NOTE
• IfyouarenotgoingtousethisTVforalongperiodoftime,be
suretoremovetheACcordfromtheACoutletorturnoff(a)
theMAINPOWERswitchontherearoftheTV(Page5).
• Asmallamountofelectricpowerisstillconsumedevenwhen
theMAINPOWERswitchisturnedoff(a)(Page5).
Switching between digital,
satellite and analogue broadcasts
Watching digital
broadcasts
Watching analogue
broadcasts
Watching satellite
broadcasts
NOTE
• Ifanumberofsatellitechannelsareset,eachtimeyoupress
theSATbuttonthechannelswitchesasfollows.
SAT1 SAT2
SAT3SAT4
Changing channels
With :r/s With 0_9
Watching TV