Sharp AQUOS LC-40LE924RU

39
Time shift
ThisfunctionenablesyoutopausethedigitalTVor
satelliteprogrammeyouarewatchingandstartwatching
itagainfromthepausedscene.Thisfunctionisavailable
onlyforthe924/824modelseries.
1 Press READY.
• TheTVstartstemporaryrecordingoftherealtime
broadcastinthebackground.
• Time shift recordable time is approximately 150
minutes for SD or 60 minutes for HD (depending on
the programmes).
2 Press I.
• TheTVshowstheprogrammefromthescenethatthe
TVstartedrecordingandtherecordingcarrieson.
• WhentheTVagainplaybacksafteroncepressingHto
stoptheprogramme,theTVshowstheprogrammefrom
thestoppedscene.
Buttons for time shift operation
Buttons Description
READY
Startrecordingtheprogrammeyouare
watching.
• Youcannotplaybacktherecorded
programmeuntilapproximatelythree
secondsafterpressingREADYtostart
recording.
I
Playbacktherecordedprogramme.
H
Stoptheprogrammeinplayback(timeshift
recordingcontinues)andgobacktothe
realtimebroadcast(live).
F
Pausetheprogrammeinplayback(time
shiftrecordingcontinues).
• Thisfunctionisreleasedin15minutes.
S
Reverse(eachtimeyoupressthisbutton,
thereversespeedchangesinthreelevels).
J
Fastforward(eachtimeyoupressthis
button,thefastforwardspeedchangesin
threelevels).
a
Playbackafterjumpingbackwardsby10
seconds.
b
Playbackafterjumpingforwardby30
seconds.
NOTE
• Insteadofpressingbuttonsontheremotecontrolunit,the
operationsabovearealsoavailableonthescreenwiththe
operationpanel.Youcancallupthisoperationpanelby
pressingCONTROLontheremotecontrolunitorselect
“Control(Timeshift)”from“Option”>“Optionforview”.
• Theoperationpanelfortimeshiftdisplaysonlyduringtimeshift
operation.
• The“Audiodescriptionsetting”menudoesnotworkduring
timeshiftplayback.
• Whentheamountofmemoryusedfortimeshiftreaches“Full”
andthebluepointisaroundtheleftedgeofthebar(seeoand
pintheCountersectiononpage40),youcannotoperatesome
functions(F(Pause),S(Reverse),a(Jumpingbackwards
by10seconds)).
• Timeshiftrecordingwillstopinthreehours.
• TimeshiftdoesnotworkforATV,externalinputs,data
broadcastsandradiobroadcasts.
• Toreleasetimeshift,pressREADY,changetheDTV/SAT
channel,change“INPUT”orturnoffthepoweroftheTV.
• Timeshiftwillbereleasedifnooperationsareperformedfor
threehours.
• Somefunctionsdonotworkduringtimeshift.
• Timeshiftisnotactuallyarecordingfunction,sotherecorded
dataisresetwhenyouexittimeshift.
• Timeshiftdoesnotworkautomatically,itstartsonlywhenyou
pressREADY.
• ThePINisrequiredwhenyouusethebuttonssuchasS,
J,a,bifyousetthePINandtheitemsfor“Parental
rating”except“None”areselected.
• Recordingautomaticallystopswhennosignalisreceived
(recordeddatawillbelost).
• Timeshiftdoesnotworkforanycopyprotectedprogrammes.
• Forcertainsignals,resolutionmaybereducedduringtimeshift
playback.
Examples of time shift usage
When you move away from the TV for a while
(press READY when you move away from the
TV)
Without time shift
Away
Youmissthescenewhileyouareaway.
With time shift
Away
Youcanwatchthemissedscenewhenyoucomeback.
When you want to watch the same scene
again (you must press READY in advance for
time shift to function)
Without time shift
Youcannotwatchthesamesceneagain.
With time shift
Youcanwatchthesamesceneagain.
Useful viewing functions