Sharp AQUOS LC-40LE924RU

60
Updating your TV via DVB-T
EnsurethatyourTVsoftwareversionisalwaysupto
date.FromtimetotimeSHARPwillmakeupdatedTV
basesoftwareandDVBsoftwareavailable.
View setting
Download setup
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” >
“Download setup”.
Searching for updates*
* AllcountriesexceptUK,SwedenandItalyaresetto“No”for
thisfunction.
TheTVautomaticallydetermineswhetheranewsoftware
versionisavailablewhentheTVisinstandbymode.
Item
Yes
Automaticallysearchesfornewsoftware
updatesavailablewhentheTVisin
standbymode.
No
Doesnotsearchforupdateinformation.
Now
Checksifthereisnewsoftware
immediately.
Downloading the software
Youcanselectthemethodofupdate.
1 If the software is updated, the confirmation
message “New download information has
been detected.” appears.
• IftheTVreceivestheupdateservicewhileinstandby
mode,aconfirmationmessagedisplaysafterturningon
thepower.
2 Follow the screen prompts.
Item
Yes
Startsdownloadingimmediately.Ittakes
approximatelyonehourtoupdate.You
cannotcarryoutotheroperationswhile
downloading.
• Cancelsthedownloadbypressing
;ontheremotecontrolunitwhen
“Discontinue”isdisplayedonthescreen
duringtheupdate.
No
Startsdownloadingautomaticallyseveral
minutesafterenteringstandbymode.
NOTE
• DonotturnofftheMAINPOWERswitchorunplugtheAC
cordwhilereceivingthedata,otherwiseitwillnotbecaptured
properly.
• Updatingthesoftwaremaytakesometime.
Getting update information
Information
Message list
Whennewsoftwareisdetected,youcanconfirmthe
updateinformationanddownloadthesoftwarefrom
“Messagelist”.
Go to “Menu” > “Setup” > “Information” >
“Message list”.
NOTE
• WhentheTVsucceedsatdownloadingnewsoftware,the
messageisupdatedinthe“Messagelist”ofthe“Information”
menu.
• Thesoftwareupdatewillnotbecarriedoutifthereisnonew
softwareavailableatthespecifieddownloadtime.
Information
Receiver report
Displayreportsregardingfailuresandchangesfortimer
settings.
Go to “Menu” > “Setup” > “Information” >
“Receiver report”.
Information
Identification
YoucanchecktheTVIDonthescreenforreportingto
customerservice.
Go to “Menu” > “Setup” > “Information” >
“Identification”.
Appendix