Sharp AQUOS LC-40LE924RU

6
What is the Menu?
YouneedtocalluptheOSDtoperformsettingsfortheTV.TheOSDforthesettingsiscalled“Menu”.The“Menu”
enablesvarioussettingsandadjustments.
Basic operation
Display the Menu
screen
Press@andthe“Menu”screen
displays.
Exit the Menu screen
Theoperationwillexitthe“Menu”
screenifyoupress>beforeitis
completed.
Select an item
The“Menu”isclassifiedbysettingcategoriesforimprovingTVviewing.
Selecting in the Menu
n Press c/d to select the desired menu, and then press ;.
Press 6 to return to the previous menu category.
o Press c/d to select the desired sub-menu, and then press
;.
p Press a/b to select the item you want to select/adjust, and
then press ;.
Setup
Backlight
AV mode
Picture
OPC
[Off]
CH list
:Back:Enter
Menu
Contrast
Selecting options
q Press a/b or c/d to configure
the control for improving TV
viewing, and then press ;.
EXAMPLE
Backlight
Yes No
NOTE
• Refertotheguidedisplaybelowthemenu
bartoseewhentopressthe;button.
LCFONT
ThisproductisembeddedwithLCFonttechnology,whichwasdevelopedbySHARPCorporationforclearlydisplayingeasy-to-read
charactersonLCDscreens.
NOTE
• “Menu”optionsdifferintheselectedinputmodes,buttheoperatingproceduresarethesame.
• Itemswith4cannotbeselectedforvariousreasons.
• Someitemscannotbeselecteddependingonsignaltypes,optionalsettingsorconnecteddevices.
Introduction