Sharp AQUOS LC-40LE924RU

32
Audio settings
Go to “Menu” > “Setup” > “Audio”.
Setup
Auto volume
Audio
[Off]
STANDARD
CH list
:Back:Enter
Menu
Audio
Auto volume
Differentsoundsourcessometimesdonothavethe
samevolumelevel,suchasaprogrammeandits
commercialbreaks.Thisfunctionreducesthisproblem
byequalizinglevels.
Item
High
Stronglyreducesthevolumegaps
amongdifferentsoundsources.
Middle
Low
Slightlyreducesthevolumegapsamong
differentsoundsources.
Off
Doesnotadjustthevolumegaps.
Audio
Audio adjustment
Youcanadjustthesoundqualitytoyourpreferencewith
thefollowingsettings.
Item
c (Cursor) d (Cursor)
Treble
Forweakertreble Forstrongertreble
Bass
Forweakerbass Forstrongerbass
Balance
Decreaseaudiofrom
therightspeaker
Decreaseaudiofrom
theleftspeaker
Audio
Surround
Thisfunctionallowsyoutoenjoyrealisticlivesound.
Audio
Bass enhancer
Thisfunctionallowsyoutoenjoybass-enhancedsound.
Audio
Clear voice
Thisfunctionemphasisesspeechagainstbackground
noiseforgreaterclarity.
Audio
Audio description setting
Thisfunctionallowsyoutoenableoutputofaudio
descriptioniftheTVreceivesasignalincludingaudio
description.
NOTE
• Whenthe“Audiodescription”issetto“On”,theaudio
descriptionsoundissuperimposedonthemainaudiowhen
youselectabroadcastcompatiblewithaudiodescription.
• Ifyoudonotclearlyhearthesoundforthevisuallyimpaired,goto
“Menu”>“Setup”>“Audio”>“Audiodescriptionsetting”>“Mix
level”,andselecttheupperleveltoturnupthevolume.
• ThisfunctionisavailableonlyforDTVbroadcasts.This“Audio
descriptionsetting”menuisnotdisplayedfortheATVorthe
externalinputs.
• Theaudiodescriptionsoundissuperimposedonthemain
audioonlywhenthesoundisoutputonthespeakersound
output,headphonesoundoutputandsoundforaudioout
output.ThesoundisnotoutputontheS/PDIFsoundoutput
andtheSCARTsoundoutput.
• ThisfunctionisnotavailablefortheAQUOSAudiospeaker
system.
• Thisfunctiondoesnotworkduringtimeshiftplayback.
Setting audio input
Option
Audio select
WhenusingtheEXT3terminalorHDMI2terminal,you
mustselectwhichterminalusestheAUDIO(R/L)jackfor
analogueaudioinput.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
Item
HDMI (Digital)
Whenconnectingdevices(including
aPC)withHDMIcabletotheHDMI2
terminal.
HDMI+Analog
Whenconnectingdevices(includinga
PC)withDVI/HDMIcabletotheHDMI
2terminalandinputtinganalogueaudio
signalsfromtheAUDIO(R/L)jack.
NOTE
• Youmustsetthisto“HDMI+Analog”whenconnectingdevices
(includingaPC)withanHDMI-certifiedcabletotheHDMI2
terminal.If“HDMI(Digital)”isset,therewillbenosoundoutput.
When selecting “EXT 3” from the “INPUT” menu
Item
Video
WhenconnectingdeviceswithAVcable
totheEXT3terminal,displayimages
withoutaudio.
Video+audio
WhenconnectingaPCtotheEXT3
terminal,andinputtinganalogueaudio
signalsfromtheAUDIO(R/L)jack.
NOTE
• Youmustalsoset“COMPONENT”fromthe“Inputselect”menu
whenselecting“EXT3”fromthe“INPUT”menu(Pages19and44).
Basic adjustment