Sharp AQUOS LC-40LE924RU

45
Additional features
Option
Colour system
Youcanchangethecoloursystemtoonethatis
compatiblewiththeimageonthescreen.
Go to “Menu” > “Setup” > “Option” > “Colour
system”.
NOTE
• Thefactorypresetvalueis“Auto”.
• If“Auto”isselected,thecoloursystemforeachchannelis
automaticallyset.Ifanimagedoesnotdisplayclearly,select
anothercoloursystem(e.g.,“PAL”,“SECAM”).
Option
Headphone/Audio out select
Youcanselectwhichdeviceisusedforoutputtingaudio.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone/Audio out
select”.
Item
Headphone
Outputaudiothroughheadphones.
Audio out
OutputaudiothroughanA/Vreceiveror
surroundaudiocontroller.
CAUTION
• Thisterminalisalsousedforheadphones.Reducethevolume
beforeusingheadphones.Overwhelmingsoundmaydamage
yourhearing.
NOTE
• Ifyouselect“Audioout”whenacableisinsertedintheHDMI
2/EXT3AUDIO(L/R)terminal,theTVspeakersaremuted.
• Whenyouselect“Audioout”,youcanadjusttheTVsound
volumewiththeYl/kbuttonsontheTVori+/-
buttonsontheremotecontrolunit.
Option
Channel selecting effect
Thisfunctionshowsascreeneffectwhenchoosingor
changingchannels.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Channel selecting effect”.
Option
Illumination
ThisfunctionmakestheLEDonthefrontofTV
illuminatedinseveralways.
Go to “Menu” > “Setup” > “Option” >
“Illumination”.
Item
Off
TheLEDisnotilluminated.
Standby
TheLEDisilluminatedwhiletheTVisin
standbymode.
Watch
TheLEDisilluminatedwhileyouwatch
TV.
Always
TheLEDisilluminatedallthetime.
NOTE
• Thefactorydefaultforthisitemis“Watch”.Setto“Off”ifyoudo
notwanttheLEDtoilluminate.
Other useful features