Sharp AQUOS LC-40LE924RU

36
Analogue setting
YoucanreconfiguretheanalogueTVchannelssettings
automaticallyormanually.
E Additional search
Usethismenutoaddnewservicesautomaticallyafter
“Analoguesearch”inthe“Autoinstallation”menuhas
beencompleted.
• Startsearchingchannelsafterselectingthecoloursystemand
soundsystem.
E Manual adjust
UsethismenutosetupanalogueTVchannelsmanually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
Youcanadjustthefrequencytothedesiredposition.
NOTE
• Adjustwhilecheckingthebackgroundpictureasareference.
• Insteadofpressingc/dtoadjustthefrequency,youcanset
bydirectlyenteringthefrequencynumberofthechannelwith
0_9numericbuttons.
EXAMPLE
• 179.25MHz:Press1>7>9>2>5.
• 49.25MHz:Press4>9>2>5>;.
Colour sys.
Selecttheoptimumcoloursystemtoreceive(“Auto”,
“PAL”,“SECAM”).
Sound sys.
Selecttheoptimumsoundsystems(broadcasting
systems)toreceive(“B/G”,“D/K”,“I”,“L/L’”).
Label
WhenaTVchannelsendsitsnetworkname,the“Auto
installation”detectstheinformationandassignsa
nametoit.However,youcanchangechannelnames
individually.
Select each character of the new name for
the channel with using the software keyboard
(Page 7).
NOTE
• Thenamecanbefivecharactersorless.
Skip
Channelswith“Skip”setto“On”arepassedoverwhen
using:r/sevenifselectedwhilewatchingtheimage
fromtheTV.
Decoder
WhenconnectingadecodertotheTV,youneedtoselect
“EXT1”.
NOTE
• Thefactorypresetvalueis“Off”.
Lock
Youcanblocktheviewingofanychannel.
NOTE
• See“PIN”forsettingaPIN.
• When“Lock”issetto“On”forachannel,“Childlockhasbeen
activated”displays,andtheimageandsoundofthechannel
areblocked.
• Whenpressing6while“Childlockhasbeenactivated”
displays,thePINinputwindowwilldisplay.Inputtingthecorrect
PINunlocksthe“PIN”temporarilyuntilthepoweristurnedoff.
E Sort
Channelpositionscanbesortedfreely.
1 Press c/d to select “Yes”, and then press
;.
2 Press a/b/c/d to select the channel you
want to move, and then press ;.
3 Press a/b/c/d to move it to the desired
position, and then press ;.
4 Repeat steps 2 and 3 until all desired channels
are sorted.
E Erase programme
Channelscanbeerasedindividually.
1 Press c/d to select “Yes”, and then press
;.
2 Press a/b/c/d to select the channel you
want to erase, and then press ;.
• Amessagewindowpopsup.
3 Press c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
4 Repeat steps 2 and 3 until all desired channels
are erased.
Basic adjustment