Using a PC
You can select the screen size.
1 Press VIEW MODE,
• The View Mode menu displays.
• The menu lists the View Mode options selectable for the type of video signal currently
being received.
2 Press VIEW MODE or A/Y while the View Mode menu is displayed to select a
desired item on the menu.
• You can sequentially select a View Mode that has ks own aspect ratio.
• Connect the PC before making adjustments. (See page 16.)
• Selectable screen size may vary with input signal type.
• You can have the same settings by choosing "View Mode" on the menu kems. (See page 27.)
Example: Screen size images see page 22
input signal
I©1
4:3
Normal Zoom
©i
Keeps the original
aspect ratio in a full
screen display.
For viewing
widescreen
programs. The top
and bottom of the
image is cropped.
Stretch
C)
An image fully fills the
screen.
Dot by Dot
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
I
input signal
©1.
1g:9
Stretch
©
An image fully fills the
screen.
Dot by Dot
3
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
Example
SmartCentral
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "System Options",
2 Press A/Y to select "Input Terminal Setling", and
then press ENTER.
:3 Press A/_I!' to select "PC input" or "Audio Select",
and then press ENTER.
4 Press A/T to select a specific adjuslment item,
and then press ENTER to set each item.
5 Press A/Y (or _1/1_) to select or adjust the desired
setting, and then press ENTER.
(D- 47
To Next Page
Loading...
