Sharp AR-7024 User Manual

118
TROUBLESHOOTING
C. Misfeed in the transport area
1
Open the fusing paper guide by
pressing down the green-labeled
projection on the guide and remove
the misfed paper.
Be careful not to tear the
misfed paper during
removal.
2
If the misfed paper cannot be removed
by the previous step but is visible in
the paper output area, remove the
paper by pulling it into the paper
output area.
Be careful not to tear the
misfed paper during
removal.
3
Close the side cover.
The misfeed indicator
( ) will go out.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
• When closing the side cover, press on the
handle.
• If the paper was torn, make sure that no
torn pieces remain in the machine.
• If the misfeed indicator ( ) does not stop
blinking, check for torn pieces of paper in
the machine.
Warning
Note

Sharp AR-7024 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Speed	24 ppm
Print Resolution	600 x 600 dpi
Copy Speed	24 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Size	A3, A4, A5, B4, B5
Paper Capacity	250 sheets
Zoom Range	25% to 400%
Scan Destinations	PC
First Print Out Time	Less than 10 seconds