Sharp AR-7024 User Manual

130
CHECKING THE IP ADDRESS IN
THE WEB PAGE
The settings of the IP address, Subnet Mask, and Default Gateway can be checked in the Web page.
1
Click [Network Status] in the menu
frame of the Web page.
2
Click [TCP/IP].
3
Check "IP Address", "Subnet Mask",
and "Default Gateway".
If you want to enter "IP Address", "Subnet Mask",
and "Default Gateway", you can go to the web
page of "Protocol Setup" from [Network
Setup]
[Protocol] to enter and submit
(administrator permission is required).
• To acquire the IP address automatically, set "DHCP" to "Enable".
• When "DHCP" settings are changed, the change will take effect after the machine is restarted.
Note

Sharp AR-7024 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Speed	24 ppm
Print Resolution	600 x 600 dpi
Copy Speed	24 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Size	A3, A4, A5, B4, B5
Paper Capacity	250 sheets
Zoom Range	25% to 400%
Scan Destinations	PC
First Print Out Time	Less than 10 seconds