Sharp AR-7024 - BASIC PRINTING (MAC)

77
4
BASIC PRINTING (MAC)
The printer expansion kit, the network expansion kit and the PS3 expansion kit must be installed and the machine
must be connected to a network.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Start the application and open the
document that you wish to print.
2
Select "Print" from the application's
"File" menu.
3
Make sure that the correct printer is
selected.
4
Select print settings.
Click and select the settings that you wish to
configure from the pull-down menu. The
corresponding setting screen will appear.
[
5
Click the "Print" button.
Printing begins.
• The machine name that appears in the
"Printer" menu is the name that was entered
when the settings were configured from the
"Software CD-ROM". Unless the name was
changed when configuring the settings, it will
be "XX-xxxx" (where "XX-xxxx" is a sequence
of characters that varies depending on your
machine).
• The Print window varies depending on the
operating system version, the printer driver
version, and the application.
XX-xxxx
Note
The settings vary depending on the operating
system version, the printer driver version, and
the application.
XX-xxxx
Note
XX-xxxx