29
SETUP
1
13
Configure the printer driver.
If you wish to use the IPP function, see "Printing
using the IPP function" (p.30) to configure the
printer driver settings.
1
Click the "Default" icon.
2
Click the machine's model name.
• Using with AppleTalk:
The machine's model name usually appears as
"SCxxxxxx"*.
• Using with Bonjour:
The machine's model name usually appears as
"xxxxxx"*.
* "xxxxxx" is a sequence of characters that varies
depending on your model.
3
Make sure that the PPD file of your model
is selected.
The PPD file of the machine is automatically
selected.
4
Click the "Add" button.
• Using with AppleTalk:
The PPD file of the machine is automatically selected
and the peripheral devices installed on the machine
are detected and automatically configured.
• Using with Bonjour:
The "Installable Options" screen appears. Select
the machine configuration and click the "Continue"
button.
14
Click the "Option & Supplies" button
and click the "Driver" (or "Options")
tab.
15
Select the machine configuration.
If you selected "Auto Select" in (3) of step 13, the
machine configuration is detected and
automatically configured. Check the configured
settings to make sure they are correct.
1
Select the options that are installed on the
machine.
In OS X 10.9 to macOS 10.12, before you are
selecting the option, select "Options".
2
Click the "OK" button.
3
Click to close the window.
This completes the configuration of the printer
driver.
The PPD file is installed in the following
folders on the startup disk.
"Library" - "Printers" - "PPDs" - "Contents" -
"Resources"
XX-xxxx (xxxxxxxx)
Bonjour
XX-xxxx (xxxxxxxx)
XX-xxxx PPD
(2)
(3)
(1)
(4)
You can check the options that are installed
on the machine by viewing in the web page of
"Device Configuration". (However, note that
"Input Tray Options" must be set to the
number of trays on the machine.)
XX-xxxx
XX-xxxx
XX-xxxx PPD
(1)
(2)
Note
To Next Page
Loading...
Need help?
General
