40
Source
You can select your desired source from this menu. It is also possible to do this by pressing the [SOURCE]
button on the remote control. The number and type of inputs will depend upon the model and
specifi cations of your set.
This menu provides options to modify picture quality and the following
modes are available:
User
Allows you to change the picture settings to your personal
preference. These settings are saved automatically.
Standard
Standard settings.
Vivid
Enhances picture saturation and sharpness.
Sport
Optimises picture quality for viewing sports.
Movie
Picture has less colour and is darker.
Game
Recommended settings for gaming. The television will turn
off all picture post processing functions to achieve minimal
input delay.
Energy
Power Saving mode, which reduces the energy used by up
Saving
20% (by reducing the power to the LED/LCD panel). In this
mode, the brightness of the picture may be reduced. This is
the default setting on your television.
Picture Mode
Note: Depending on television model, some picture mode options may not be available.
Settings will only be stored in the User mode.
To enter the Picture Mode menu, press the [SOURCE] button and select TV. Then press the [MENU]
button and select Picture Mode using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when
selected.
Android Functionality
Note: You can go directly to the DTV source (if tuned in), but
pressing the numbered buttons on the remote control,
i.e. pressing the number [1] will switch the set to channel 1.
Alternatively, you can press the [TV] button.
To Next Page
Loading...
Need help?
General