50
Satellite
While in the satellite mode, the following options will be available:
Satellite Re-Scan
Allows you to scan selected satellite.
Satellite Add
Allows you to add new satellite transponder into
the list of satellites.
Satellite Update
Tunes all frequencies, on which channels are not
currently tuned. This is recommended when
searching new channels which were added
recently, without retuning all channels.
Satellite Manual
Allows you to scan selected satellite transponders.
Tuning
Channel Skip
Allows you to choose channels, which will be
skipped when pressing [CH+ / CH-] buttons on the
remote.
Channel Sort
Allows you to swap position of two
channels between each other.
Channel Move
Allows you to move selected channel to new
position.
Channel Edit
Allows you to delete channels from the channel
list.
Clear Channel List
Allows you to delete all tuned channels.
Channel Installation
Set the type of Digital television signal you receive.
Mode
This setting affects content of Channels menu.
Auto Channel
If this option is set to ON, channel positions, names
Update
and frequencies will be periodically updated by
the provider. This may cause issues if you ordered
channels in the list of channels by yourself. In such
case we recommend to keep this option off.
Channel Update
Notifi cations about changes carried out by Auto
Message
Channel Update function.
Parental Controls
Set the parental guidance level, and block channels
or inputs.
Channels Blocked
Set manually, which channels will be blocked,
independent of age restrictions.
Program Restrictions
Set the channels blocking based on age/rating.
Inputs Blocked
Allows you to block specifi ed inputs.
Change PIN
Allows you to change the PIN, needed to access
blocked content.
Audio Channel
Allows you to change preferred audio track of the
current analogue channel, in case more than one
audio track is available.
Android Functionality
To Next Page
Loading...
Need help?
General