59
CD-DVD500H
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
RDS radio
- Using the radio data system (RDS) -
To automatically play the desired programme
(EON-PTY)
When the desired type of programme is broadcast, the radio switches to it automati-
cally.
Note:
When “PTYI” appears, press the DISP MODE button to check the type of the current
programme.
1 Tune in to an RDS station (when a station name is displayed).
2 Press the EON button when “EON” appears.
“SELECT” and “PTY TI” will appear alternately for about 6 seconds.
If the EON button is pressed when “EON” is not displayed, “NO EON” will
appear for 5 seconds to indicate that the unit cannot enter the EON stand-by
mode.
3 Whilst they are displayed, select the desired programme type by
pressing the PRESET
XX
XX
X or
WW
WW
W PRESET button.
The selected programme type will flash.
4 Within 4 seconds, press the PTY. TI button.
The selected programme type and “WAITING” will be displayed for 2 sec-
onds each.
“PTY” will appear, and the unit will enter the EON-PTY stand-by mode.
5 When the specified programme starts on an ON (other network)
station, the unit will automatically switch to the station and “PTY”
will flash.
6 When the programme is over, the unit will automatically return
to the original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. (“Programme type” “WAIT-
ING”)
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. (“PTY” will go out.)
About the PTYI (Dynamic PTY Indicator):
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is received.
Dynamic PTY indicates that the PTY for the station tuned in, or the PTY referenced in
the EON data, is assessed whenever the programme changes and may be changed.
Meaning
Tuned in to a dynamic PTY station.
Tuned in to a static PTY.
PTYI
Lights up
Goes out
Using the radio data system (RDS) (continued)
To Next Page
Loading...
