Sharp CD-XP120W - Specifications

02/5/27 CD-XP120W(A)3.fm
E-29
ENGLISH
CD-XP120W
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
!
General
!
Amplifier
!
CD player
!
Tuner
!
Cassette deck
!
Speaker
Power source AC 110/127/220/230 - 240 V, 50/60 Hz
Power
consumption
48 W
Dimensions Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 343 mm (13-1/2")
Weight 6.5 kg (14.3 lbs.)
Output power MPO: 60 W (30 W + 30 W) (10 % T.H.D.)
RMS: 40 W (20 W + 20 W) (10 % T.H.D.)
RMS: 30 W (15 W + 15 W) (0.9 % T.H.D.)
Output terminals Speakers: 8 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Input terminals Microphone: 1 mV/600 ohms
Type 3-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
Frequency
response
125 - 8,000 Hz (Normal tape)
Signal/noise ratio 50 dB (TAPE 1, recording/playback)
50 dB (TAPE 2, playback)
Wow and flutter 0.3 % (WRMS)
Type 2-way type speaker system
Tweeter
10 cm (4") Woofer
Maximum input
power
40 W
Rated input power 20 W
Impedance 8 ohms
Dimensions Width: 200 mm (7-7/8")
Height: 305 mm (12")
Depth: 167 mm (6-9/16")
Weight 2.1 kg (4.6 lbs.)/each