Sharp ER-A220

25
Programming logo message print format
You can select the number of lines of logo message, and the position to print it on receipt or journal.
*A: Loge message type
0: Header 3-line message without graphic logo
1: Graphic logo only
2: Footer 3-line message with graphic logo
3: Header 6-line message
4: Header 3-line message with graphic logo
5: Header 3-line message and footer 3-line message
Programming RS-232C interface
To realize the on-line communication, please consult with your dealer.
(1) RS-232C terminal number
(2) RS-232C transmission form
* Item: Selection: Entry:
A Always enter 0. 0
B Transmission line form Half duplex system 1
Full duplex system 0
(3) RS-232C transmission type and baud rate
* Item: Selection: Entry:
A Transmission type Send print data 1
Download/upload RAM data 0
B Baud rate (bps) 2400 3
4800 4
9600 5
19200 6
Ñ32≈
*AB
ÉÑ
To set “00”
Ñ31≈
*AB
ÉÑ
To set “00”
Ñ30≈
Terminal number (max. 6 digits)
ÉÑ
To set “0”
Ñ
11
≈
0
Ñ
É
PrintKey operation example
Ñ11≈
*A
ÉÑ
To set “0”
Downloaded from: http://www.usersmanualguide.com/