53
Thermal printer density
* 50 is the default setting. To make the print darker, set a larger number, and to make the print lighter, set a
smaller number.
Language selection
*Language: 0: English 2: French 3: Spanish (default: English)
When you change the language, the texts such as clerk names, logo messages and function texts
(refer to page 42), which you programmed, will be reset to the default settings. The language
selection must be made before programming clerk names, logo messages and function texts.
Training clerk specification for training mode
For the details of clerk training, please refer to “TRAINING MODE” on page 56.
s
86
@
25
sA
PrintKey operation example
s86@
Clerk code
(1 to 25)
As
To cancel
s
88
@
2
A
PrintKey operation example
s88@
*Language
(0, 2 or 3)
A
To set “0”
s
50
@
00
sA
PrintKey operation example
s50@
*Printer density
(00-99)
As
To set “0”
A242_3 FOR THE MANAGER 06.1.10 5:19 PM Page 53
To Next Page
Loading...
Need help?
General
