56
2 Programming report 2
Job code
A to H from the left
Training clerk specification
Language selection
EJ memory type
* Job code #63, 64, 65, 67,
69, 71, 72, 76, 77, 85, 87
and 95 are fixed settings,
for which you cannot
change the settings.
4 Printer density programming report
Entered Value
Printer density
Printing density
example
5 PLU programming report
PLU code
PLU text
Mode parameter
Unit price
Range
Associated
dept. code
3 Auto key programming report
TRAINING MODE
The training mode is used when the operator or the manager practices register operations.
When a clerk in training is selected, the machine automatically enters the training mode. To specify a clerk to be
trained, refer to “Training clerk specification for training mode” in “ADVANCED PROGRAMMING” in page 53.
The training operation is valid only in REG, MGR and VOID mode.
The corresponding clerk memory is only updated in the training mode.
A clerk set in training
25 L
1000 >
3 @
#
A
PrintKey operation example
A242_4 FOR THE MANAGER 06.1.10 5:25 PM Page 56
To Next Page
Loading...
Need help?
General
