Sharp ER-A320

9) PROGRAMMING FOR %KEY
A : Sign A
+0
–1
B : Not used (Fixed at "0")
C : Taxable 4 C
Non taxable 0
Taxable 1
D : Taxable 3 D
Non taxable 0
Taxable 1
E : Taxable 2 E
Non taxable 0
Taxable 1
F : Taxable 1 F
Non taxable 0
Taxable 1
MRS = 100000
Note : Current setting is displayed.
10) PROGRAMMING FOR MEDIA KEYS &
FUNCTION KEYS
A : Mantissa (0 to 9)
B : Exponent (0 to.8)
MRS = 18 digits (RA, PO)
18 digits (CASH2, CHn, CHK)
17 digits (TAX)
Note : Current setting is displayed.
When starting setting, press [TAX] key twice.
11) DATE, TIME PROGRAMMING
DATE : date entry format follows SRV Programming (6 digits)
TIME : 24 hour system (4 digits)
MRS = DATE : 01 - 01 - 00
TIME : 00 - 00
12) CONSECUTIVE NO. PROGRAMMING
CONSECTIVE
NO.
CONSECUTIVE NO. : 0000 to 9999 (4 digits)
MRS = 0001
13) TAX TABLE PROGRAMMING
72 BREAKPOINTS CAN BE PROGRAMMED FOR EACH TAX TA-
BLE.
(Case of interval between break point is 1 dollar or more and less than
100 dollar, 36 breakpoints is programmed for each table.)
DEPRESSION OF THE SBTL KEY AT THE FOLLOWING POINTS
MEANS A TAX TABLE DELETE OPERATION.
A : lNTERVAL BETWEEN BREAKPOINTS IS 1 DOLLAR OR MORE
AND LESS THAN 100 DOLLAR = 1
lNTERVAL BETWEEN BREAKPOINTS IS BELOW 1 DOLLAR :0
B : TABLE 1 PROGRAMMING = 1
TABLE 2 PROGRAMMING = 2
TABLE 3 PROGRAMMING = 3
TABLE 4 PROGRAMMING = 4
TAX rate 0.0000 - 99.9999%
Cycle 0 - 9999
Initial TAX 0 - 999
Lower TAX limit 0 - 99999
Break point 0 - 99999
MRS = NO TAX
@/FOR
ABCDEF
CA/AT%n
Not changed
%n
@/FOR
AB
CA/AT
Not changed
PO
CASH2
CHn
CHK
TAX
RA
XXXXXX
#/TM/SBTL
HHMM
DATA
TIME
@/FOR
XXXX #/TM/SBTL
XXXXXX@/FORAB @/FOR
Declaration of TAX TAX rate
XXX
@/FOR
XXXX
@/FOR
Initial TAXCycle
XXXXX
@/FOR
XXXXX
@/FOR
Break pointLower TAX limit
CA/AT
TAX