Sharp ER-A320 Programming Manual

Service mode programming
The following are the key operation required for programming.
(In SRV mode)
(In PGM mode)
JOB#901-A must be set to "0"
Details of [A] [B] [C] [D] will be discussed at each item description.
★ mark is MRS setting.
[JOB#901] : MRS = 0002
#901-A : 1. SRV programming in PGM mode
1. SRV programming in PGM mode 901-A
Enable 0
★
Disable 4
#901-B : 1. TAX system
1. Tax system 901-B
Auto tax 1-4 & manual tax 0
★
CANADIAN TAX (Type to Type )6
CANADIAN TAX
(Type
: VAT on TAX)
7
#901-C : 1. Rounding system
1. Rounding system 901-C
Normal 0
★
SINGAPORE 8
#901-D : 1. "00"key or "000"key selection
2. TAB setting
1. "00"key or "000"
selection
2. TAB setting 901-D
"00"key
00
0.0 1
0.00 2 ★
0.000 3
"000"key
04
0.0 5
0.00 6
0.000 7
[JOB#902] NOT USED : MRS = 0000
[JOB#903] NOT USED : MRS = 0000
[JOB#904] MRS = 0000
#904-A : 1. Printing of date
1. Printing of date 904-A
Yes 0
★
No 4
#904-B : 1. Printing of consecutive No.
1. Printing of consecutive No.
Yes 0
★
No 4
#904-C, D : Not used (Fixed at "00")
[JOB#905] MRS = 0105
#905-A : 1. Taxable 4 subtotal print on X/Z report.
2. Gross Tax 4 and refund Tax 4 total print on X/Z report.
3. Net Tax 4 total print on X/Z report.
1. Taxable 4
SBTL
2. Gross Tax 4 and
refund Tax 4
3. Nex Tax 4 905-A
Print
Print
Print 0
★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
#905-B : 1. Tax printing when taxable subtotal is zero.
2. Tax printing when GST is VAT.
3. Tax printing when tax is zero.
1. Taxable
subtotal is zero
2. GST is VAT 3. Tax is zero 905-B
Skip
Print
Print 0
Skip 1
★
Skip
Print 2
Skip 3
Print
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
#905-C : 1. GST EXPT print on X/Z report
1. GST EXPT 905-C
Print 0
★
Skip 4
XXX
CA/AT
(Job#)
[A] [B] [C] [D]
(DATA)
0
@/FOR
XXX
CA/AT
(Job#)
[A] [B] [C] [D]
(DATA)
0
@/FOR
9

Sharp ER-A320 Specifications

General

Type	Electronic Cash Register
Departments	99
Paper Width	58mm
Display	LCD
Printer	Thermal Printer
Memory Backup	Battery Backup