#905-D : 1. TAX METHOD
Type 0
Type
1
Type
2
Type
3
Type
4
Type
5 ★
Type 6
Type
7
Type
8
Type
9
[JOB#906] MRS = 0200
#906-A : 1. Not used (Fixed at "0")
#906-B : 1. Hash department setting
1. Hash department setting 906-B
Disable 0
Enable 2
★
#906-C : 1. Split pricing counting
1. Split pricing counting 906-C
Quantity 0
★
Package 4
#906-D : 1. Fractional quantity
1. Fractional quantity 906-D
No 0
★
Yes (3 digit decimal place) 1
[JOB#907] MRS = 0010
#907-A, B : Not used (Fixed at "00")
#907-C : 1. Minus Dept./PLU
1. Minus Dept./PLU 907-C
Disable 0
Enable 1
★
#907-D : Not used (Fixed at "0")
[JOB#908] MRS = 0700
#908-A : GT print on Z report
GT1 (NET) GT2(+) GT3(-) 908-A
Print
Print
Print 0
★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
#908-B : GT print on X report
GT1(NET) GT2(+) GT3(-) 908-B
Skip
Skip
Skip 0
Print 1
Print
Skip 2
Print 3
Print
Skip
Skip 4
Print 5
Print
Skip 6
Print 7
★
#908-C : 1. Add void-mode transaction data to hourly total report
2. Resetting of consecutive number in Z1 resetting
1. Add void-mode
transaction to hourly total
reporet
2. Resetting of
consective No. in
Z1 resetting
908-C
No
No 0
★
Yes 1
Yes
No 4
Yes 5
#908-D : 1. Z1 resetting, resets GT Enable/Disable
1. GT resetting at Z1 908-D
No 0
★
Yes 1
[JOB#909] MRS = 2000
#909-A : 1. Printing of training GT on the X report
2. Printing of training GT on the Z report
1. Printing of training GT
on the X report
2. Printing of training
GT on the Z report
909-A
Skip
Print 0
Skip 1
Print
Print 2
★
Skip 3
#909-B : Not used (Fixed at "0")
#909-C : 1. Printing of data in void-mode totalizer and manager void
totalizer on Z2 report
2. Printing of data in void-mode totalizer and manager void
totalizer on Z1 report
1. Void-mode totalizer on
Z2 printing
2. Void-mode
totalizer on Z1
printing
909-C
Print
Print 0
★
Skip 2
Skip
Print 4
Skip 6
#909-D : Not used (Fixed at "0")
[JOB#910] NOT USED : MRS = 0000
[JOB#911] MRS = 0000
#911-A : 1. Fraction treatment
1. Fraction treatment 911-A
Round off 0
★
Round up 1
Round down 2
#911-B, C, D : Not used (Fixed at "000")