Sharp ER-A320 Programming Manual

CHAPTER 3. OP X/Z, X1/Z1,X2/Z2 MODE
The following categories of reports can be printed by the ECR.
1) OP X/Z reports (individual clerk reports)
2) X1/Z1 reports (Daily sales total X and Z reports)
3) X2/Z2 reports (Periodic total X and Z reports)
1. Print report
In the table below those reports marked with a circle "O" can be
printed by the standard machine and those marked with an asterisk
"
" can be printed when the corresponding option is added.
REPORT NAME KEY ENTRY
MODE
DATA FOR READING REMARK
OP X/Z X1/Z1 X2/Z2
X Z X1 Z1 X2 Z2
GENERAL
CA/AT
DEPT/GROUP
MDSE SBTL
GROUP CODE ,
TRANSACTION
CHK
HOURLY
#/TM/SBTL
DAILY NET
#/TM/SBTL
PLU(RANGE)
PLU PLU CODE ,
PLU(DEPT)
DPTn
DEPT.CODE ,
DPT#
To read respective reports. it is necessary to follow the procedure
below.
PLU code range can be specified by entering the start and end
numbers according to the following procedure.
When specifying a single time interval, PLU code, the start num-
ber has only to be entered.
To read respective reports, it is necessary to follow the procedure
below.
Reading
(X report)
KEY
Reading
(Z report)
All
Group code
(1 to 9)
X
MDSE SBTL
XXX
PLU
Single
XXX
PLU code
@/FOR
All
End No.
Reading
DEPT#
Dept. code
XX

Sharp ER-A320 Specifications

General

Type	Electronic Cash Register
Departments	99
Paper Width	58mm
Display	LCD
Printer	Thermal Printer
Memory Backup	Battery Backup