Blocking Reception of Unwanted Fax-
101
5. Special
Functions
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes from parties
that you specify. This saves paper by not printing out unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 20 (Anti-Junk Fax)
to ON as explained on page 111, and then enter the fax numbers from which
you do not want to receive faxes as explained below.
♦ Up to 50 numbers can be entered in the Anti Junk Number List.
♦ To clear a number from the Anti Junk Number List, you need to know the 2-
digit number that identifies it. If you have forgotten this number, print out the
Anti Junk Number List as explained on page 115.
1
Press , , , .
2
Press to enter a number in the Anti
Junk Number List.
(Press to clear a number from the
list.)
3
Entering: Enter a 2-digit number from “01” to “50” with the numeric
keys. This number identifies the fax number that you will enter in the
next step.
Clearing: Enter the 2-digit number that identifies the fax number you
want to clear, and go to Step 5.
4
Enter the fax number.
5
Press .
6
Return to Step 3 to enter (or clear) another fax number, or press
repeatedly to return to the date and time display.
MENU
3
0
8
1
2
START/
ENTER
STOP
Display:
08:STORE JUNK FAX #
1=SET, 2=CLEAR
1:JUNK FAX # SET
ENTER # (01-50)
To Next Page
Loading...
